Recently, there has been a tendency to refuse vinyl collection among industrial wastes, and there is a need for a solution. There is a need for a method that can process plastic waste, which is not perishable, together with combustible waste and efficiently use it in a cogeneration plant.The present invention provides a method of collecting vinyl and waste plastics to remove impurities, crushing them, and then extruding them by heat. In the process of preparing flammable wastes with the composition ratio of 80% light oil, 8% 2-butanol, 10% methacresol and 2% magnesium, this fuel is added to prepare solid fuel to increase calorific value and complex Could do it smoothly. The extruded solid fuel was burned to measure harmful gases and calories.The temperature duration during exotherm was up to 1 hour 30 minutes per kg and the temperature rose up to 1,300 ℃. The calorific value was 7,113 kcal / kg and 8,007 kcal / kg with the addition of a softener. The addition of a flame retardant to the waste produces little odor upon combustion. The amount of soot generated during the combustion of the added RPF was below the environmental pollution standard. As it is dried at high temperature (250 ℃), it is sterilized and hygienic.It can be used as fuel for cogeneration plants, etc., and can be used as fuel for heating a greenhouse.
Volume 11 | 07-Special Issue
Pages: 1807-1814